Skip to content

TS 36.413 — S1 Application Protocol (S1AP)⚓︎

Release: Rel 15 · Version assessed: 15.1.0 · Network: 4G · Applies to: MME · Interfaces: S1-MME

Mandatory items: 259, of which 259 supported. A further 163 clauses of the specification carry no conformance requirement and are not listed.

Mandatory items⚓︎

Ref. Item Status Support Remarks
5.0 S1AP Services Mandatory Supported
6.0 Services Expected from Signalling Transport Mandatory Supported
8.0 S1AP Procedures Mandatory Supported
8.1 List of S1AP Elementary procedures Mandatory Supported Messages supported are mentioned in later sections
8.2 E-RAB Management procedures Mandatory Supported
8.2.1 E-RAB Setup Mandatory Supported
8.2.1.1 General Mandatory Supported
8.2.1.2 Successful Operation Mandatory Supported
8.2.1.3 Unsuccessful Operation Mandatory Supported
8.2.1.4 Abnormal Conditions Mandatory Supported
8.2.2 E-RAB Modify Mandatory Supported
8.2.2.1 General Mandatory Supported
8.2.2.2 Successful Operation Mandatory Supported
8.2.2.3 Unsuccessful Operation Mandatory Supported
8.2.2.4 Abnormal Conditions Mandatory Supported
8.2.3 E-RAB Release Mandatory Supported
8.2.3.1 General Mandatory Supported
8.2.3.2 Successful Operation Mandatory Supported
8.2.3.2.1 E-RAB Release - MME initiated Mandatory Supported
8.2.3.2.2 E-RAB Release Indication - eNB initiated Mandatory Supported
8.2.3.3 Abnormal Conditions Mandatory Supported
8.2.4 E-RAB Modification Indication Mandatory Supported
8.2.4.1 General Mandatory Supported
8.2.4.2 Successful Operation Mandatory Supported
8.2.4.3 Unsuccessful Operation Mandatory Supported
8.2.4.4 Abnormal Conditions Mandatory Supported
8.3 Context Management procedures Mandatory Supported
8.3.1 Initial Context Setup Mandatory Supported
8.3.1.1 General Mandatory Supported
8.3.1.2 Successful Operation Mandatory Supported
8.3.1.3 Unsuccessful Operation Mandatory Supported
8.3.1.4 Abnormal Conditions Mandatory Supported
8.3.2 UE Context Release Request - eNB initiated Mandatory Supported
8.3.2.1 General Mandatory Supported
8.3.2.2 Successful Operation Mandatory Supported
8.3.3 UE Context Release (MME initiated) Mandatory Supported
8.3.3.1 General Mandatory Supported
8.3.3.2 Successful Operation Mandatory Supported
8.3.3.3 Abnormal Conditions Mandatory Supported
8.3.4 UE Context Modification Mandatory Supported
8.3.4.1 General Mandatory Supported
8.3.4.2 Successful Operation Mandatory Supported
8.3.4.3 Unsuccessful Operation Mandatory Supported
8.3.6 UE Context Modification Indication Mandatory Supported
8.3.6.1 General Mandatory Supported
8.3.6.2 Successful Operation Mandatory Supported
8.6.3.4 Abnormal Conditions Mandatory Supported
8.4 Handover Signalling Mandatory Supported
8.4.1 Handover Preparation Mandatory Supported
8.4.1.1 General Mandatory Supported
8.4.1.2 Successful Operation Mandatory Supported
8.4.1.3 Unsuccessful Operation Mandatory Supported
8.4.1.4 Abnormal Conditions Mandatory Supported
8.4.2 Handover Resource Allocation Mandatory Supported
8.4.2.1 General Mandatory Supported
8.4.2.2 Successful Operation Mandatory Supported
8.4.2.3 Unsuccessful Operation Mandatory Supported
8.4.2.4 Abnormal Conditions Mandatory Supported
8.4.3 Handover Notification Mandatory Supported
8.4.3.1 General Mandatory Supported
8.4.3.2 Successful Operation Mandatory Supported
8.4.4 Path Switch Request Mandatory Supported
8.4.4.1 General Mandatory Supported
8.4.4.2 Successful Operation Mandatory Supported
8.4.4.3 Unsuccessful Operation Mandatory Supported
8.4.4.4 Abnormal Conditions Mandatory Supported
8.4.5 Handover Cancellation Mandatory Supported
8.4.5.1 General Mandatory Supported
8.4.5.2 Successful Operation Mandatory Supported
8.4.5.3 Unsuccessful Operation Mandatory Supported
8.4.5.4 Abnormal Conditions Mandatory Supported
8.4.6 eNB Status Transfer Mandatory Supported
8.4.6.1 General Mandatory Supported
8.4.6.2 Successful Operation Mandatory Supported
8.4.7 MME Status Transfer Mandatory Supported
8.4.7.1 General Mandatory Supported
8.4.7.2 Successful Operation Mandatory Supported
8.5 Paging Mandatory Supported
8.5.1 General Mandatory Supported
8.5.2 Successful Operation Mandatory Supported
8.6 NAS transport Mandatory Supported
8.6.1 General Mandatory Supported
8.6.2 Successful Operations Mandatory Supported
8.6.2.1 Initial UE Message Mandatory Supported
8.6.2.2 DOWNLINK NAS TRANSPORT Mandatory Supported
8.6.2.3 UPLINK NAS TRANSPORT Mandatory Supported
8.6.4 Abnormal Conditions Mandatory Supported
8.7 Management procedures Mandatory Supported
8.7.1 Reset Mandatory Supported
8.7.1.1 General Mandatory Supported
8.7.1.2 Successful Operation Mandatory Supported
8.7.1.2.1 Reset Procedure Initiated from the MME Mandatory Supported
8.7.1.2.2 Reset Procedure Initiated from the E-UTRAN Mandatory Supported
8.7.1.3 Abnormal Conditions Mandatory Supported
8.7.1.3.1 Abnormal Condition at the EPC Mandatory Supported
8.7.1.3.2 Abnormal Condition at the E-UTRAN Mandatory Supported
8.7.1.3.3 Crossing of Reset Messages Mandatory Supported
8.7.2 Error Indication Mandatory Supported
8.7.2.1 General Mandatory Supported
8.7.2.2 Successful Operation Mandatory Supported
8.7.3 S1 Setup Mandatory Supported
8.7.3.1 General Mandatory Supported
8.7.3.2 Successful Operation Mandatory Supported
8.7.3.3 Unsuccessful Operation Mandatory Supported
8.7.3.4 Abnormal Conditions Mandatory Supported
8.7.4 eNB Configuration Update Mandatory Supported
8.7.4.1 General Mandatory Supported
8.7.4.2 Successful Operation Mandatory Supported
8.7.4.3 Unsuccessful Operation Mandatory Supported
8.7.4.4 Abnormal Conditions Mandatory Supported
8.7.5 MME Configuration Update Mandatory Supported Configuration Update procedure is supported partially. 1. In this procedure Time To Wait IE is not supported i.e. a MME would not retransmit the message towards ENB after the time indicated in Time To Wait IE has elapsed. a. MME would not wait for response corresponding to Configuration Update Request, before sending a new Configuration Update Request towards ENB. b. MME would not wait for the time indicated in Time To Wait IE to elapse, before sending a new Configuration Update Request towards ENB.
8.12 Warning Message Transmission Procedures Mandatory Supported
8.12.1 Write-Replace Warning Mandatory Supported
8.12.1.1 General Mandatory Supported
8.12.1.2 Successful Operation Mandatory Supported
8.12.1.3 Abnormal Conditions Mandatory Supported
8.12.2 Kill Mandatory Supported
8.12.2.1 General Mandatory Supported
8.12.2.2 Successful Operation Mandatory Supported
9.0 Elements for S1AP Communication Mandatory Supported
9.1 Message Functional Definition and Content Mandatory Supported
9.1.1 General Mandatory Supported
9.1.2 Message Contents Mandatory Supported
9.1.2.1 Presence Mandatory Supported
9.1.2.2 Criticality Mandatory Supported
9.1.2.3 Range Mandatory Supported
9.1.2.4 Assigned Criticality Mandatory Supported
9.1.3 E-RAB Management Messages Mandatory Supported
9.1.3.1 E-RAB SETUP REQUEST Mandatory Supported
9.1.3.2 E-RAB SETUP RESPONSE Mandatory Supported
9.1.3.3 E-RAB MODIFY REQUEST Mandatory Supported
9.1.3.4 E-RAB MODIFY RESPONSE Mandatory Supported
9.1.3.5 E-RAB RELEASE COMMAND Mandatory Supported
9.1.3.6 E-RAB RELEASE RESPONSE Mandatory Supported
9.1.3.7 E-RAB RELEASE INDICATION Mandatory Supported
9.1.3.8 E-RAB MODIFICATION INDICATION Mandatory Supported
9.1.3.9 E-RAB MODIFICATION CONFIRM Mandatory Supported
9.1.4 Context Management Messages Mandatory Supported
9.1.4.1 INITIAL CONTEXT SETUP REQUEST Mandatory Supported
9.1.4.3 INITIAL CONTEXT SETUP RESPONSE Mandatory Supported
9.1.4.4 INITIAL CONTEXT SETUP FAILURE Mandatory Supported
9.1.4.5 UE CONTEXT RELEASE REQUEST Mandatory Supported
9.1.4.6 UE CONTEXT RELEASE COMMAND Mandatory Supported
9.1.4.7 UE CONTEXT RELEASE COMPLETE Mandatory Supported
9.1.4.8 UE CONTEXT MODIFICATION REQUEST Mandatory Supported
9.1.4.9 UE CONTEXT MODIFICATION RESPONSE Mandatory Supported
9.1.4.10 UE CONTEXT MODIFICATION FAILURE Mandatory Supported
9.1.4.13 UE CONTEXT MODIFICATION INDICATION Mandatory Supported
9.1.4.14 UE CONTEXT MODIFICATION CONFIRM Mandatory Supported
9.1.5 Handover Signalling Messages Mandatory Supported
9.1.5.1 HANDOVER REQUIRED Mandatory Supported
9.1.5.2 HANDOVER COMMAND Mandatory Supported
9.1.5.3 HANDOVER PREPARATION FAILURE Mandatory Supported
9.1.5.4 HANDOVER REQUEST Mandatory Supported
9.1.5.5 HANDOVER REQUEST ACKNOWLEDGE Mandatory Supported
9.1.5.6 HANDOVER FAILURE Mandatory Supported
9.1.5.7 HANDOVER NOTIFY Mandatory Supported
9.1.5.8 PATH SWITCH REQUEST Mandatory Supported
9.1.5.9 PATH SWITCH REQUEST ACKNOWLEDGE Mandatory Supported
9.1.5.10 PATH SWITCH REQUEST FAILURE Mandatory Supported
9.1.5.11 HANDOVER CANCEL Mandatory Supported
9.1.5.12 HANDOVER CANCEL ACKNOWLEDGE Mandatory Supported
9.1.5.13 eNB STATUS TRANSFER Mandatory Supported
9.1.5.14 MME STATUS TRANSFER Mandatory Supported
9.1.6 PAGING Mandatory Supported
9.1.7 NAS Transport Messages Mandatory Supported
9.1.7.1 INITIAL UE MESSAGE Mandatory Supported
9.1.7.2 DOWNLINK NAS TRANSPORT Mandatory Supported
9.1.7.3 UPLINK NAS TRANSPORT Mandatory Supported
9.1.8 Management messages Mandatory Supported
9.1.8.1 RESET Mandatory Supported
9.1.8.2 RESET ACKNOWLEDGE Mandatory Supported
9.1.8.3 ERROR INDICATION Mandatory Supported
9.1.8.4 S1 SETUP REQUEST Mandatory Supported
9.1.8.5 S1 SETUP RESPONSE Mandatory Supported
9.1.8.6 S1 SETUP FAILURE Mandatory Supported
9.1.8.7 ENB CONFIGURATION UPDATE Mandatory Supported
9.1.8.8 ENB CONFIGURATION UPDATE ACKNOWLEDGE Mandatory Supported
9.1.8.9 ENB CONFIGURATION UPDATE FAILURE Mandatory Supported
9.1.8.10 MME CONFIGURATION UPDATE Mandatory Supported
9.1.8.11 MME CONFIGURATION UPDATE ACKNOWLEDGE Mandatory Supported
9.1.13 Warning Message Transmission Messages Mandatory Supported
9.1.13.1 WRITE-REPLACE WARNING REQUEST Mandatory Supported
9.1.13.2 WRITE-REPLACE WARNING RESPONSE Mandatory Supported
9.1.13.3 KILL REQUEST Mandatory Supported
9.1.13.4 KILL RESPONSE Mandatory Supported
9.1.14 eNB DIRECT INFORMATION TRANSFER Mandatory Supported
9.1.15 MME DIRECT INFORMATION TRANSFER Mandatory Supported
9.2 Information Element Definitions Mandatory Supported
9.2.0 General Mandatory Supported
9.2.1 Radio Network Layer Related IEs Mandatory Supported
9.2.1.1 Message Type Mandatory Supported
9.2.1.2 E-RAB ID Mandatory Supported
9.2.1.3 Cause Mandatory Supported
9.2.1.3a RRC Establishment Cause Mandatory Supported
9.2.1.6 Target ID Mandatory Supported
9.2.1.7 Source eNB to Target eNB Transparent Container Mandatory Supported
9.2.1.8 Target eNB to Source eNB Transparent Container Mandatory Supported
9.2.1.13 Handover Type Mandatory Supported
9.2.1.15 E-RAB Level QoS Parameters Mandatory Supported
9.2.1.18 GBR QoS Information Mandatory Supported
9.2.1.19 Bit Rate Mandatory Supported
9.2.1.20 UE Aggregate Maximum Bit Rate Mandatory Supported
9.2.1.26 Security Context Mandatory Supported
9.2.1.31 eNB Status Transfer Transparent Container Mandatory Supported
9.2.1.36 E-RAB List Mandatory Supported
9.2.1.37 Global eNB ID Mandatory Supported
9.2.1.38 E-UTRAN CGI Mandatory Supported
9.2.1.41 Security Key Mandatory Supported
9.2.1.44 Message Identifier Mandatory Supported
9.2.1.45 Serial Number Mandatory Supported
9.2.1.46 Warning Area List Mandatory Supported
9.2.1.47 Emergency Area ID Mandatory Supported
9.2.1.51 Warning Security Information Mandatory Supported
9.2.1.55 Inter-system Information Transfer Type Mandatory Supported
9.2.1.56 Source To Target Transparent Container Mandatory Supported
9.2.1.57 Target To Source Transparent Container Mandatory Supported
9.2.1.60 Allocation and Retention Priority Mandatory Supported
9.2.1.62 CSG Id Mandatory Supported
9.2.1.63 CSG Id List Mandatory Supported
9.2.1.73 CSG Membership Status Mandatory Supported
9.2.2.2 GTP-TEID Mandatory Supported
9.2.3 NAS Related Ies Mandatory Supported
9.2.3.3 MME UE S1AP ID Mandatory Supported
9.2.3.4 eNB UE S1AP ID Mandatory Supported
9.2.3.5 NAS-PDU Mandatory Supported
9.2.3.6 S-TMSI Mandatory Supported
9.2.3.9 GUMMEI Mandatory Supported
9.2.3.10 UE Identity Index value Mandatory Supported
9.2.3.11 IMSI Mandatory Supported
9.2.3.12 MMEC Mandatory Supported
9.2.3.13 UE Paging Identity Mandatory Supported
9.2.3.16 TAI Mandatory Supported
9.2.3.18 UE S1AP ID pair Mandatory Supported
9.3 Message and Information Element Abstract Syntax (with ASN.1) Mandatory Supported
9.3.0 General Mandatory Supported
9.3.2 Elementary Procedure Definitions Mandatory Supported
9.3.3 PDU Definitions Mandatory Supported
9.3.4 Information Element Definitions Mandatory Supported
9.3.5 Common Definitions Mandatory Supported
9.3.6 Constant Definitions Mandatory Supported
9.3.7 Container Definitions Mandatory Supported
9.4 Message Transfer Syntax Mandatory Supported
9.5 Timers Mandatory Supported
10.0 Handling of Unknown, Unforeseen and Erroneous Protocol Data Mandatory Supported
10.1 General Mandatory Supported
10.2 Transfer Syntax Error Mandatory Supported
10.3 Abstract Syntax Error Mandatory Supported
10.3.1 General Mandatory Supported
10.3.2 Criticality Information Mandatory Supported
10.3.3 Presence Information Mandatory Supported
10.3.4 Not comprehended IE/IE group Mandatory Supported
10.3.4.1 Procedure Code Mandatory Supported
10.3.4.1A Type of Message Mandatory Supported
10.3.4.2 IEs other than the Procedure Code and Type of Message Mandatory Supported
10.3.5 Missing IE or IE group Mandatory Supported
10.3.6 IEs or IE groups received in wrong order or with too many occurrences or erroneously present Mandatory Supported
10.4 Logical Error Mandatory Supported
10.5 Exceptions Mandatory Supported

Optional items⚓︎

The specification leaves these 204 items to the implementation; 25 are supported or partially supported. An item marked Not applicable belongs to an area the platform does not provide, named in the Support column. Expand for the full list.

204 optional items
Ref. Item Support Remarks
8.3.10 Retrieve UE Information Not supported
8.3.10.1 General Not supported
8.3.10.2 Successful Operation Not supported
8.3.10.3 Unsuccessful Operation Not supported
8.3.10.4 Abnormal Conditions Not supported
8.3.11 UE Information Transfer Not supported
8.3.11.1 General Not supported
8.3.11.2 Successful Operation Not supported
8.3.11.3 Unsuccessful Operation Not supported
8.3.11.4 Abnormal Conditions Not supported
8.3.12 eNB CP Relocation Indication Not supported
8.3.12.1 General Not supported
8.3.12.2 Successful Operation Not supported
8.3.12.3 Unsuccessful Operation Not supported
8.3.12.4 Abnormal Conditions Not supported
8.3.13 MME CP Relocation Indication Not supported
8.3.13.1 General Not supported
8.3.13.2 Successful Operation Not supported
8.3.13.3 Unsuccessful Operation Not supported
8.3.13.4 Abnormal Conditions Not supported
8.6.2.4 NAS NON DELIVERY INDICATION Not supported
8.6.2.4a NAS DELIVERY INDICATION Not supported
8.7.5.1 General Not supported
8.7.5.2 Successful Operation Not supported
8.7.5.3 Unsuccessful Operation Not supported
8.7.5.4 Abnormal Conditions Not supported
8.7.6 Overload Start Not supported
8.7.6.1 General Not supported
8.7.6.2 Successful Operation Not supported
8.7.6.3 Unsuccessful Operation Not supported
8.7.7 Overload Stop Not supported
8.7.7.1 General Not supported
8.7.7.2 Successful Operation Not supported
8.8 S1 CDMA2000 Tunnelling Procedures Not supported
8.8.1 General Not supported
8.8.2 Successful Operations Not supported
8.8.2.1 Downlink S1 CDMA2000 Tunnelling Not supported
8.8.2.2 Uplink S1 CDMA2000 Tunnelling Not supported
8.8.4 Abnormal Conditions Not supported
8.9 UE Capability Info Indication Supported
8.9.1 General Supported
8.9.2 Successful Operation Supported
8.10 Trace Procedures Not supported Trace procedures are not supported.
8.10.1 Trace Start Not supported
8.10.1.1 General Not supported
8.10.1.2 Successful Operation Not supported
8.10.2 Trace Failure Indication Not supported
8.10.2.1 General Not supported
8.10.2.2 Successful Operation Not supported
8.10.3 Deactivate Trace Not supported
8.10.3.1 General Not supported
8.10.3.2 Successful Operation Not supported
8.10.4 Cell Traffic Trace Not supported
8.10.4.1 General Not supported
8.10.4.2 Successful Operation Not supported
8.11 Location Reporting Procedures Not supported
8.11.1 Location Reporting Control Not supported
8.11.1.1 General Not supported
8.11.1.2 Successful Operation Not supported
8.11.2 Location Report Failure Indication Not supported
8.11.2.1 General Not supported
8.11.2.2 Successful Operation Not supported
8.11.3 Location Report Not supported
8.11.3.1 General Not supported
8.11.3.2 Successful Operation Not supported
8.12.3 PWS Restart Indication Not supported
8.12.3.1 General Not supported
8.12.3.2 Successful Operation Not supported
8.12.4 PWS Failure Indication Not supported
8.12.4.1 General Not supported
8.12.4.2 Successful Operation Not supported
8.13 eNB Direct Information Transfer Not supported
8.13.1 General Not supported
8.13.2 Successful Operation Not supported
8.13.2.1 eNB Direct Information Transfer Not supported
8.13.3 Abnormal Conditions Not supported
8.14 MME Direct Information Transfer Not supported
8.14.1 General Not supported
8.14.2 Successful Operation Not supported
8.14.2.1 MME Direct Information Transfer Not supported
8.14.3 Abnormal Conditions Not supported
8.15 eNB Configuration Transfer Not supported
8.15.1 General Not supported
8.15.2 Successful Operation Not supported
8.15.2.1 eNB Configuration Transfer Not supported
8.16 MME Configuration Transfer Not supported
8.16.1 General Not supported
8.16.2 Successful Operation Not supported
8.16.2.1 MME Configuration Transfer Not supported
8.18 Secondary RAT Data Usage Report Not supported
8.18.1 General Not supported
8.18.2 Successful Operations Not supported
8.18.2.1 SECONDARY RAT DATA USAGE REPORT Not supported
8.18.3 Unsuccessful Operation Not supported
8.18.4 Abnormal Conditions Not supported
9.1.4.11 UE RADIO CAPABILITY MATCH REQUEST Not supported
9.1.4.12 UE RADIO CAPABILITY MATCH RESPONSE Not supported
9.1.4.21 RETRIEVE UE INFORMATION Not supported
9.1.4.22 UE INFORMATION TRANSFER Not supported
9.1.4.23 eNB CP RELOCATION INDICATION Not supported
9.1.4.24 MME CP RELOCATION INDICATION Not supported
9.1.7.4 NAS NON DELIVERY INDICATION Not supported
9.1.7.4a NAS DELIVERY INDICATION Not supported
9.1.7.5 REROUTE NAS REQUEST Not supported
9.1.8.12 MME CONFIGURATION UPDATE FAILURE Not supported The Time to Wait IE is not supported.
9.1.8.13 OVERLOAD START Not supported
9.1.8.14 OVERLOAD STOP Not supported
9.1.9 S1 CDMA2000 Tunnelling Messages Not supported
9.1.9.1 DOWNLINK S1 CDMA2000 TUNNELING Not supported
9.1.9.2 UPLINK S1 CDMA2000 TUNNELING Not supported
9.1.10 UE CAPABILITY INFO INDICATION Not supported
9.1.11 Trace Messages Not supported Trace messages are not supported.
9.1.11.1 TRACE START Not supported
9.1.11.2 TRACE FAILURE INDICATION Not supported
9.1.11.3 DEACTIVATE TRACE Not supported
9.1.12 Location Reporting Messages Not supported
9.1.12.1 LOCATION REPORTING CONTROL Not supported
9.1.12.2 LOCATION REPORT FAILURE INDICATION Not supported
9.1.12.3 LOCATION REPORT Not supported
9.1.13.5 PWS RESTART INDICATION Not supported
9.1.13.6 PWS FAILURE INDICATION Not supported
9.1.16 eNB CONFIGURATION TRANSFER Supported
9.1.17 MME CONFIGURATION TRANSFER Supported
9.1.18 CELL TRAFFIC TRACE Not supported
9.1.20 Secondary RAT Report Data Usage Messages Not supported
9.1.20.1 SECONDARY RAT DATA USAGE REPORT Not supported
9.2.1.4 Trace activation Not supported
9.2.1.9 Source RNC to Target RNC Transparent Container Not supported
9.2.1.10 Target RNC to Source RNC Transparent Container Not supported
9.2.1.11 Source BSS to Target BSS Transparent Container Not supported
9.2.1.12 Target BSS to Source BSS Transparent Container Not supported
9.2.1.14 Extended RNC-ID Not supported
9.2.1.16 Paging DRX Not supported
9.2.1.21 Criticality Diagnostics Supported
9.2.1.22 Handover Restriction List Partial Supported for flag "NR Restriction"
9.2.1.23 CDMA2000-PDU Not supported
9.2.1.24 CDMA2000 RAT Type Not supported
9.2.1.25 CDMA2000 Sector ID Not supported
9.2.1.27 UE Radio Capability Not supported
9.2.1.28 CDMA2000 HO Status Not supported
9.2.1.29 CDMA2000 HO Required Indication Not supported
9.2.1.32 COUNT value Supported
9.2.1.33 CDMA2000 1xRTT RAND Not supported
9.2.1.34 Request Type Supported
9.2.1.35 CDMA2000 1xRTT SRVCC Info Not supported
9.2.1.39 Subscriber Profile ID for RAT/Frequency priority Not supported
9.2.1.40 UE Security Capabilities Supported
9.2.1.42 UE History Information Not supported
9.2.1.43 Last Visited Cell Information Not supported
9.2.1.43a Last Visited E-UTRAN Cell Information Not supported
9.2.1.43b Last Visited GERAN Cell Information Not supported
9.2.1.48 Repetition Period Not supported
9.2.1.49 Number of Broadcasts Requested Not supported
9.2.1.50 Warning Type Not supported
9.2.1.52 Data Coding Scheme Not supported
9.2.1.53 Warning Message Contents Not supported
9.2.1.54 Broadcast Completed Area List Not supported
9.2.1.61 Time to wait Supported
9.2.1.64 MS Class mark 2 Not supported
9.2.1.65 MS Class mark 3 Not supported
9.2.1.66 Cell Type Not supported
9.2.1.67 Old BSS to New BSS Information Not supported
9.2.1.68 Layer 3 Information Not supported
9.2.1.78 Paging Priority Supported The IE is sent only when the EBI in the Downlink Data Notification corresponds to QCI 65 or 69.
9.2.1.120 V2X Services Authorized Not supported
9.2.1.121 Served DCNs Items Not supported
9.2.1.122 UE Sidelink Aggregate Maximum Bit Rate Not supported
9.2.1.123 Enhanced Coverage Restricted Not supported
9.2.1.124 Secondary RAT Usage Report List Not supported
9.2.1.125 Handover Flag Not supported
9.2.1.126 Extended Bit Rate Supported
9.2.1.127 NR UE Security Capabilities Supported
9.2.1.128 UE Application layer measurement configuration Not supported
9.2.1.129 CE-mode-B Restricted Not supported
9.2.2.1 Transport Layer Address Not supported
9.2.3.1 LAI Not supported
9.2.3.2 RAC Not supported
9.2.3.7 TAC Supported
9.2.3.8 PLMN Identity Supported
9.2.3.14 DL Forwarding Supported
9.2.3.15 Direct Forwarding Path Availability Supported
9.2.3.17 Relative MME Capacity Supported
9.2.3.19 Overload Response Not supported
9.2.3.20 Overload Action Not supported
9.2.3.21 CS Fallback Indicator Not supported
9.2.3.22 CN Domain Supported
9.2.3.23 RIM Transfer Not supported
9.2.3.24 RIM Information Not supported
9.2.3.25 RIM Routing Address Not supported
9.2.3.26 SON Configuration Transfer Supported
9.2.3.27 SON Information Supported
9.2.3.28 SON Information Reply Supported
9.2.3.29 X2 TNL Configuration Info Not supported
9.2.3.37 Additional CS Fallback Indicator Not supported
9.2.3.44 MME Group ID Not supported
9.2.3.45 Additional GUTI Not supported
9.2.3.46 Extended UE Identity Index Value Not supported
9.2.3.47 NB-IoT UE Identity Index Value Not supported
9.2.3.48 DL NAS PDU Delivey Request Not supported
9.2.3.49 DL CP Security Information Not supported
9.2.3.50 UL CP Security Information Not supported
9.3.1 Usage of private message mechanism for non-standard use Not supported
10.6 Handling of AP ID Supported
Annex C(informative) Processing of Transparent Containers at the MME Partial Partially supported.

Assessed 2026-09-15 against TS 36.413 version 15.1.0.